The DS6345 CAN Board is the interface between a SCALEXIO system and CAN/CAN FD bus systems. This board is similar to the well-established DS6342 CAN Board but supports signal improvement capability (SIC) in addition. This allows higher baud rates and more stable connections.
The DS6345 provides eight channels for development and test applications, which makes it ideal for compact test systems with a limited number of available slots, such as the SCALEXIO AutoBox or the eight-slot SCALEXIO LabBox.
Network management functions such as wake-up and sleep are also included as are software-configurable, CAN feed-through, and termination circuit.
|
Parameter |
Specification |
|---|---|
|
Communication interface (internal) |
IOCNET (up to 2.5 Gbit/s link speed) |
|
Provided channel types |
8 × CAN 8 |
|
Galvanic isolation |
No |
|
I/O connector |
50-pin Sub-D |
|
Typical power consumption |
5 W (typ. 0.21 A, at +24 V) |
|
Physical size |
|
CAN 8 Channel Type
The CAN 8 channel type allows CAN/CAN FD communication via a CAN bus according to ISO 11898, ISO 11898-2:2016, ISO 11898-3, and CAN SIC communication according to CiA 601‑4.
|
Functionality |
Specification |
|---|---|
|
Buses |
Support of the following buses:
|
|
Transceiver1) |
|
|
Transceiver1) |
|
|
Transceiver1) |
|
|
Transceiver1) |
|
|
Termination |
120 Ω (parallel termination between CAN High and CAN Low, software-configurable) |
|
Termination |
560 Ω or 5.6 kΩ (software-configurable) |
|
Termination |
100 mA |
|
Supported function blocks |
CAN |
|
Failure routing unit (FRU) |
No |
1) The specifications of the mounted transceiver might be different. dSPACE might change the transceiver used without notice. This change does not affect the board revision number.