RTI Bypass Blockset Vs. 2.9.1p1                                  November 2012
Last-Minute Information
*************************************************************************
Copyright (c) 2012 dSPACE GmbH, Germany


Contents:

1.  General
2.  Improvements & fixed Problems
3.  Installing the Patch
4.  Limitations


1. General
*************************************************************************
This patch can only be installed on an existing RTI Bypass Blockset Vs. 2.9.1

installation (dSPACE Release 7.4).


2. Improvements & fixed Problems
*************************************************************************
  
 INTERNAL BYPASS Interface:
  - Can field rotation by appending -aRTI_Rotate_ASAP2_Lookup2d_Axis=1 to the TLC commandline arguments.
  - Performance improvements
  - several bugfixes
  
3. Installing the Patch
*************************************************************************

To install the patch, you must be logged on with administrator rights.
Close any dSPACE software and MATLAB before invoking the patch installer:
 RTIBypassVs2.9.1p1.exe.
The setup will automatically locate and patch the RTI Bypass Blockset 
installation. After this patch is applied, the version of the installed
patch is shown in the RTI Bypass Blockset library and in the MATLAB Command
Window during startup.


4. Limitations
*************************************************************************

This RTI Bypass Blockset Vs. 2.9.1p1 software is restricted for the use 
with the dSPACE Releases 7.4. The RTI Bypass Blockset Vs. 2.9.1p1 software 
will not be installed for other versions of dSPACE software.  

Please contact dSPACE for further information.

*************************************************************************