November 2014
MotionDesk 3.1 Patch 2 for dSPACE RCP&HIL Release 7.4
Last-Minute Information
======================================================================
Copyright (c) 2014 dSPACE GmbH, Germany

Contents:

1. General
2. Problems Fixed by This Patch
3. Limitations and Workaround
4. Installing the Patch
5. Changes to your dSPACE installation

======================================================================

1. General
----------------------------------------------------------------------
Preconditions for installation of this patch:
	- Installation of dSPACE RCP&HIL Release 7.4


2. Problems Fixed by This Patch
----------------------------------------------------------------------
250006: MotionDesk 3.1 Patch 1 included
  - 250880: Graphic output error with graphic adapters NVIDIA NVS and GeForce
  - 270850: Saving of renderer log file without success.
  
272968: MotionDesk 3.1 Patch 1 Hotfix 1 included
  - 272989: Change font size of numeric instrument

336868: MDBS 2.2.1 Patch 1
  - 337119 + 337969: Limit sending data from simulator via network with max 50Hz
  - 337968: Signal data do not send in separated network packets

252922: MotionDesk 3.1 Patch 2
  - 251761: Signal data do not receive from separated network packets
  - 324938: Limit of MotionDesk DAQ is 100Hz
  - 338607: Timestamps only with 1/100s
  - 341339: No visual feedback of DAQ refresh rate
  
The Patch fixes the problems described above.


3. Limitations and Workaround
----------------------------------------------------------------------
- 270850: To save the renderer log file at correct file path you must reset the MotionDesk user settings.
  (Tools -> Import and Export Settings... -> Reset all settings)
  

4. Installing the Patch
----------------------------------------------------------------------
To install the patch, you must be logged on with administrator rights.

Ensure that the active installation referenced by %DSPACE_ROOT% is the dSPACE Release 7.4.

To install this update, simply run DS_MotionDesk_3.1p2_p2_252922.exe.
The setup will automatically locate and patch the active dSPACE installation.


----------------------------------------------------------------------
End of File