April 2013
ModelDesk 2.5 Patch 3 for dSPACE RCP&HIL Release 7.3
Last-Minute Information
======================================================================
Copyright (c) 2013 dSPACE GmbH, Germany

Contents:

1. General
2. Problems Fixed by This Patch
3. Limitations and Workaround
4. Installing the Patch
5. Changes to your dSPACE installation

======================================================================

1. General
----------------------------------------------------------------------
This patch can be installed only after the installation of dSPACE RCP&HIL Release 7.3



2. Problems Fixed by This Patch
----------------------------------------------------------------------

225685: Missing Road Generator automation.
214513: Copy and paste operations cause ModelDesk to crash under Windows7 x64.
223023: Missing range checks for Custom Friction/Height Maps.
223884: Performance for long roads needs to be improved.
225361: The Traffic Editor downloads the open scenario to Simulink instead of the active scenario.
225505: ModelDesk migration of ASM Truck fails.
223469: The UI panes of the Maneuver Editor and Traffic Editor do not float and dock.
234130: Road Generator uses wrong messages if another RCP&HIL setup is installed.
237807: Multiple instances of Parameter pages that use aliases were not linked to parameter files.
241231: Use of parameter addresses in parameter files instead of aliases.
243506: No more dialog in multi-instance synchronization.
249265: EngineDiesel.compressor.Sw_omega_TC_Conv is always set to 1.
251675: Road user signals are not migrated properly.
226352: PHS MP systems with more than 16 computation nodes cannot be used.
262585: Generating ini files does not work properly.

The Patch fixes the problems described above.



3. Limitations and Workaround
----------------------------------------------------------------------
None



4. Installing the Patch
----------------------------------------------------------------------
To install the patch, you must be logged on with administrator rights.

Ensure that the active installation referenced by %DSPACE_ROOT% is dSPACE Release 7.3.

To install this update, simply run DS_ModelDesk25P3_p3_266451.exe.
The setup will automatically locate and patch the active dSPACE installation.



----------------------------------------------------------------------
End of File