README file for the RTI-MP Patch 6.1p1                    December 2010

=======================================================================
Copyright (c) 2010 dSPACE GmbH, Germany

-----------------------------------------------------------------------
Contents:

1. Introduction
2. Problems Fixed by This Patch
3. Installing the Patch


=======================================================================

-----------------------------------------------------------------------
1. Introduction
-----------------------------------------------------------------------
   This patch can only be installed on top of an existing dSPACE 
   Release 6.6, RTI-MP 6.1. 

-----------------------------------------------------------------------
2. Problems Fixed by This Patch
-----------------------------------------------------------------------

- The Gigalink Blockset cannot use virtual gigalinks to communicate 
  between applications of an RTI-MP application running on different 
  CPUs of the same multicore DS1006 Processor Board.

- For MATLAB R2010a the IPC communication code is not protected against 
  minor time step execution if the solver "ode1" is used and Real-Time 
  Workshop generates additional minor time steps (e.g. when a variable 
  transport delay block is used in the model)

- RTI-MP build process fails if IPC blocks are placed in masked triggered
  subsystems  

-----------------------------------------------------------------------
3. Installing the Patch
-----------------------------------------------------------------------

   To install the RTI-MP Patch, execute DS_RTIMP61p1_176668.exe.

   NOTE: You need to close any dSPACE software and MATLAB before 
         invoking the installation.

=======================================================================
End of File