- Home
- Support
- Version & Compatibility
- Compatibility Tables
- MATLAB R2010x/R2011x
| RCP and HIL software | MATLAB R2010a | MATLAB R2010b | MATLAB R2010bSP1 | MATLAB R2010bSP2 | MATLAB R2011a | MATLAB R2011b | |
| Release 7.2 | 32-bit | 32-bit | -2 | 32-bit | 32-bit | ||
| Release 7.1 | 32-bit | 32-bit | 32-bit | ||||
| Release 7.0 | 32-bit | 32-bit | 32-bit 1 | ||||
| Release 6.6 | 32-bit | ||||||
| TargetLink® | MATLAB R2010a | MATLAB R2010b | MATLAB R2010bSP1 | MATLAB R2011a | MATLAB R2011b | ||
| 3.3 | 32-bit / 64-bit | 32-bit / 64-bit | -2 | 32-bit / 64-bit | 32-bit / 64-bit | ||
| 3.2 |
32-bit | 32-bit | 32-bit 1 |
1 Subsequently tested and approved. Thus this information differs from the documentation.
2 Will be tested and possibly approved by dSPACE.
Compatibility with MATLAB "plus" (+) releases
If we state compatibility with a MATLAB "plus" (+) release, the corresponding major release (without +) was not tested for compatibility.
Normally no compatibility problems are known, however. The dSPACE setup programs will not prevent the installation.
Please note that you would use such a combination on your own risk. We reserve the right to refuse support in these cases.
Visit the following page on the MathWorks® website for general information about "plus" (+) releases:
http://www.mathworks.de/support/solutions/en/data/1-4GZDU1/index.html?product=ML&solution=1-4GZDU1
