For a better experience on dSPACE.com, enable JavaScript in your browser. Thank you!

DS4201-S Serial Interface Board

Serial communication

The DS4201-S is an interface for serial communication between a dSPACE system and external devices. The DS4201-S provides communication on four separate channels.

Application Areas

The DS4201-S Serial Interface Board can be used to set up communication connections between the dSPACE modular system and any external device via the RS232, RS422, or RS485 interface. You can connect external devices such as sensors, measuring instruments, or displays.

 

Parameter Specification
General
  • 4 independent serial communication channels, each with a PC16550D UART (universal asynchronous receiver/transmitter)
  • Supported transceiver types: RS232-C, RS422, RS485
Interrupts
  • Programmable interrupt control unit for up to 4 independent serial communication interrupts
Serial communication channels
  • 4 RS232 transceiver channels
  • RS422 and RS485 transceivers optional
  • Clock source: up to 24 MHz (optional for RS422 and RS485, custom clock source possible)
  • Modem control functions
Baud rate range RS232
  • 1.8432 MHz clock: up to 115.2 Kbaud
  • 24 MHz clock: up to 115.2 Kbaud (limited by RS232 transceiver)
  RS422
  • 1.8432 MHz clock: up to 115.2 Kbaud
  • 24 MHz clock: up to 1.5 Mbaud
  RS485
  • 1.8432 MHz clock: up to 115.2 Kbaud
  • 24 MHz clock: up to 1.5 Mbaud
Parity bits
  • Even, odd, or no parity
Stop bits
  • 1, 1.5, or 2 bits
Word length
  • 5, 6, 7, or 8 bits
FIFOs
  • 16-byte input FIFO
  • 16-byte output FIFO
Physical connections
  • 50-pin male Sub-D connector
Host interface
  • One 8- or 16-bit ISA slot (power supply only)
Physical characteristics Physical size
  • 340 x 125 x 15 mm (13.4 x 4.9 x 0.6 in)
Ambient temperature
  • 0 ... 70 °C (32 ... 158 °F)
Power supply
  • +5 V ±5%, 350 mA
  • +12 V ±5%, 75 mA