RapidPro

Integrating automotive sensors and actuators is a key task in rapid prototyping performed for electronic control unit functions. dSPACE’s RapidPro hardware provides unprecedented flexibility in adapting sensor and actuator signals to prototyping platforms (dSPACE MicroAutoBox/AutoBox/MicroLabBox). The RapidPro training gives you a step-by-step introduction to using the RapidPro software and hardware together with a dSPACE prototyping system. You will learn how to configure the RapidPro system with the ConfigurationDesk configuration software and to implement the required I/O with the RapidPro Control Unit Blockset if you work with a RapidPro Control Unit. If you are not familiar with the dSPACE prototyping systems or with the ControlDesk and Real-Time Interface software, it is recommended to request this course in combination with the dSPACE Real-Time Systems course.

  • Engineers working with rapid prototyping
  • Engineers who want to use the dSPACE prototyping systems and the RapidPro hardware and software
  • Required: Experience with MATLAB® and Simulink®, as well as ControlDesk and Real-Time Interface

  • Set up RapidPro signal conditioning and power stages Configure the RapidPro Units with ConfigurationDesk
  • Learn about the structure and features of the RapidPro system
  • Implement the I/O of a RapidPro Control Unit with the corresponding Real-Time Interface

  • dSPACE prototyping systems
  • Real-Time Interface
  • ControlDesk
  • RTI RPCU Blockset
  • ConfigurationDesk
  • MATLAB/Simulink

  • Introduction to the RapidPro hardware
  • Introduction to ConfigurationDesk
  • Monitoring and diagnostics of a RapidPro System
  • Introduction to the RapidPro RTI blocksets

DatesLocation and time
On request
Contact Information

Drive innovation forward. Always on the pulse of technology development.

Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.