- Home
- Products
- Hardware
- Simulator Hardware
- Simulator Extensions
- Failure Simulation
DS1450 Bus FIU Board
Offers the essential options of electrical failure insertion for the physical layer of buses such as FlexRay. These options include short circuits, open circuit, and varying termination resistance.
| DS1450 Bus FIU Board Spezification | |
| Hardware |
|
| Software |
|
Failure insertion options |
|
High-Current Failure Simulation
Our high-current failure simulation unit on dSPACE Simulator supports failure simulation on ECU inputs and outputs. One FIU controller card (DS5355) supports up to 19 signal channels on two High Current FIU Relay Trays (DS5390). Due to its modularity, the FIU controller card can be expanded to increase the number of channels. These relay trays allow failures with currents up to 50 A and voltages of up to 300 V. The FIU is controlled from ControlDesk® Next Generation via a serial RS232 or CAN and can be combined with dSPACE Simulator Mid-Size and Full-Size.
| dSPACE Simulator High Current Variant | ||
| FIU-Cards |
|
|
Number of cards per simulator |
|
|
Number of channels per card |
|
|
| Switchtype |
|
|
Max. continuous current |
|
|
Possible failure types |
|
|
