Compatibility with MATLAB® 64-bit Releases

Please note: Since dSPACE Release 2016-A, only 64-bit MATLAB versions are supported. Therefore the table below does not list more recent dSPACE Releases than 2015-B.

The tables below show which dSPACE products can generally be used with 64-bit MATLAB Releases. To find out which MATLAB Releases are supported exactly, refer to the MATLAB Compatibility Tables.

dSPACE Tools

dSPACE Tool dSPACE Release
7.2, 7.3, 7.4
dSPACE Release
2013-A
dSPACE Release
2013-B
dSPACE Release
2014-A
dSPACE
Release
2014-B
dSPACE
Release
2015-A
dSPACE
Release
2015-B
ASM - yes yes yes yes yes yes
AutomationDesk (Matlab Access Library) - - - yes 1) yes 1) yes yes
ConfigurationDesk - yes yes yes yes yes yes
ModelDesk - yes yes yes yes yes yes
MotionDesk - yes yes yes yes yes yes
TargetLink yes yes yes yes yes yes yes
VEOS - - yes yes yes yes yes

RTI and RTI Blocksets

RTI and RTI Blocksets dSPACE Release
7.2, 7.3, 7.4
dSPACE Release
2013-A
dSPACE Release
2013-B
dSPACE Release
2014-A
dSPACE Release
2014-B
dSPACE Release
2015-A
dSPACE Release
2015-B
RTI - yes yes yes yes yes yes
RTI-MP - yes yes yes yes yes yes
RTI CAN Blockset - yes yes yes yes yes yes
RTI CAN MultiMessage Blockset - yes yes yes yes yes yes
RTI LIN MultiMessage Blockset - yes yes yes yes yes yes
RTI FlexRay Configuration Blockset - yes yes yes yes yes yes
RTI FPGA Blockset (support started for Matlab R2012b) - yes yes yes yes yes yes
RTI RapidPro Control Unit Blockset (RTIRPCU) - - yes yes yes yes yes
RTI Ethernet (UDP) Blockset - - yes yes yes yes yes
RTI XCP on Ethernet Blockset - - yes yes yes yes yes
RTI AUTOSAR Package - - - - disc.5) disc.5) disc.5)
RTI AUTOSAR Blockset - - - - yes yes yes
RTI Bypass Blockset - - yes 7) yes 6) yes yes yes

Platform API packages

Platform API package dSPACE Release
7.2, 7.3, 7.4
dSPACE Release
2013-A
dSPACE Release
2013-B
dSPACE Release
2014-A
dSPACE Release
2014-B
dSPACE Release
2015-A
dSPACE Release
2015-B
HIL API MAPort implemented in .NET 2) - - - - - - -
XIL API MAPort implemented in .NET - - - - - yes yes
Matlablib2 - - -  yes 3)  yes 3) yes yes
MLIB/ MTRACE - - - disc.4) disc.4) disc.4) disc.4)

Footnotes  
1 AutomationDesk MATLAB Access Library supports the remote access to 64-bit MATLAB releases starting with dSPACE Release 2014-A. However the same MATLAB release must also be installed as 32-bit version. If the MATLAB Access Library is not required, AutomationDesk can also be installed and used without MATLAB 64-bit support.
2 HIL API.NET cannot be used in 64-bit MATLAB releases. Because there are no further dependencies to MATLAB, it is possible to use it outside of MATLAB.
3 matlablib2 supports the remote access to 64-bit MATLAB releases. However the same MATLAB release must also be installed as 32-bit version.
4  MLIB/MTRACE last time available in dSPACE Release 2013-B.
5 RTI AUTOSAR Package last time available in dSPACE Release 2014-A.
6 It is necessary to install Service Pack 2 and RTI Bypass 3.2 Patch 2. Patch Setup does not ask for license files. But you will need the proper RTI Bypass license before you can use the blockset. If in any doubt, use Installation Manager to check for the license and add it if missing.
7 Introduced with Release 2013-B Implementation-Software Service Pack 3.

Tags
Date 2016-06-09
Software-Typ Simulationsmodelle, Software für Seriencode-Generierung, Implementierungssoftware, Experimentier- und Visualisierungssoftware, Testautomatisierungssoftware, Simulationssoftware
Produkt ASM (Automotive Simulation Models), AutomationDesk, ConfigurationDesk, ModelDesk, MotionDesk, Platform API Package, RCP- und HIL-Software, RTI (Real-Time Interface), TargetLink, VEOS
Informationstyp Referenzinformationen
Informationskategorie Versionen und Kompatibilität
dSPACE Release 2015-B, 2015-A, 2014-B, 2014-A, 2013-B, 2013-A, Bis 2013-A

Treiben Sie Innovationen voran. Immer am Puls der Technologieentwicklung.

Abonnieren Sie unser Expertenwissen. Lernen Sie von erfolgreichen Projektbeispielen. Bleiben Sie auf dem neuesten Stand der Simulation und Validierung. Jetzt dSPACE direct und dSPACE direct aeropace & defense abonnieren.

Formularaufruf freigeben

An dieser Stelle ist ein Eingabeformular von Click Dimensions eingebunden. Dieses ermöglicht es uns Ihr Newsletter-Abonnement zu verarbeiten. Aktuell ist das Formular ausgeblendet aufgrund Ihrer Privatsphäre-Einstellung für unsere Website.

Externes Eingabeformular

Mit dem Aktivieren des Eingabeformulars erklären Sie sich damit einverstanden, dass personenbezogene Daten an Click Dimensions innerhalb der EU, in den USA, Kanada oder Australien übermittelt werden. Mehr dazu in unserer Datenschutzbestimmung.