RapidPro

Integrating automotive sensors and actuators is a key task in rapid prototyping performed for electronic control unit functions. dSPACE’s RapidPro hardware provides unprecedented flexibility in adapting sensor and actuator signals to prototyping platforms (dSPACE MicroAutoBox/AutoBox/MicroLabBox). The RapidPro training gives you a step-by-step introduction to using the RapidPro software and hardware together with a dSPACE prototyping system. You will learn how to configure the RapidPro system with the ConfigurationDesk configuration software and to implement the required I/O with the RapidPro Control Unit Blockset if you work with a RapidPro Control Unit. If you are not familiar with the dSPACE prototyping systems or with the ControlDesk and Real-Time Interface software, it is recommended to request this course in combination with the dSPACE Real-Time Systems course.

  • Engineers working with rapid prototyping
  • Engineers who want to use the dSPACE prototyping systems and the RapidPro hardware and software
  • Required: Experience with MATLAB® and Simulink®, as well as ControlDesk and Real-Time Interface

  • Set up RapidPro signal conditioning and power stages Configure the RapidPro Units with ConfigurationDesk
  • Learn about the structure and features of the RapidPro system
  • Implement the I/O of a RapidPro Control Unit with the corresponding Real-Time Interface

  • dSPACE prototyping systems
  • Real-Time Interface
  • ControlDesk
  • RTI RPCU Blockset
  • ConfigurationDesk
  • MATLAB/Simulink

  • Introduction to the RapidPro hardware
  • Introduction to ConfigurationDesk
  • Monitoring and diagnostics of a RapidPro System
  • Introduction to the RapidPro RTI blocksets

DatesLocation and time
On request
Kontakt zu dSPACE

Treiben Sie Innovationen voran. Immer am Puls der Technologieentwicklung.

Abonnieren Sie unser Expertenwissen. Lernen Sie von erfolgreichen Projektbeispielen. Bleiben Sie auf dem neuesten Stand der Simulation und Validierung. Jetzt dSPACE direct und dSPACE direct aeropace & defense abonnieren.

Formularaufruf freigeben

An dieser Stelle ist ein Eingabeformular von Click Dimensions eingebunden. Dieses ermöglicht es uns Ihr Newsletter-Abonnement zu verarbeiten. Aktuell ist das Formular ausgeblendet aufgrund Ihrer Privatsphäre-Einstellung für unsere Website.

Externes Eingabeformular

Mit dem Aktivieren des Eingabeformulars erklären Sie sich damit einverstanden, dass personenbezogene Daten an Click Dimensions innerhalb der EU, in den USA, Kanada oder Australien übermittelt werden. Mehr dazu in unserer Datenschutzbestimmung.